Furniture & wood pieces that have ages beside the salty sea for years have a unique character. You can achieve the same look by making your own Salt Wash style paint at home.
Step 1: Gather supplies for this project
- Wood of your choice for base of your sign
- Old chip brush
- Paint of your choice
- Stir stick
- Un-sanded grout in a neutral color
- Metal Word
Step 2: Prepare the wood for your sign base
For the specific sign I created, you’ll need a variety of wood cut to 18″ long. I was able to use scraps and trim pieces mostly from my local Habitat for Humanity REstore, making this sign also super affordable! The mix of textures and widths of the wood make the finished sign even more interesting.
Step 3: Mix the un-sanded grout with your selected paint color
It does seem strange but what you’re creating is a lumpy thick mixture which will be the base coat of your sign. I started with about a 1/2 cup paint and 1/2 cup of un-sanded grout for each of the colors I was using. Stir together with a stir stick until you get the desired thickness.
Step 4: Paint your base coat
Apply the paint mixture, using a chip brush, to each board using a cross hatch motion. Do not try to overly smooth as you want the texture and strokes to show when the piece dries.
Step 5: Allow the base coat to dry thoroughly before moving onto your next step.
Step 6: Top coat paint
Apply a top coat of paint to each piece. You can use the paint of your choice, flat or chalk paint would be my recommendation, it just needs to contrast to the base coat you applied. For the pictured piece I used a cream base coat of the un-sanded grout mixture, then applied a grey top coat.
Step 7: Sand your sign to reveal the sea worthy look!
After your top coat of paint has dried then you can sand each board to achieve the salt washed look! This is the fun part and you can you a rotary or mouse saner or a heavy grit sand paper to work on each piece until it looks just the way you’d like.
Step 8: Assemble your sign base
Cut 2 strips of wood to fit the length of your sign. I used 1×2 firing strips.
Flip over you boards in the order you’d like them to be on your completed sign and drill a screw into each board, top and bottom to secure each piece.
Step 9: Add the metal embellishment to your sign.
While I used a metal word I found at Hobby Lobby, there are lots of possibilities for how you can embellish your sign. I recently picked up some 3D wood cut out words that would work great for this or you could event add some metal bulldog clips to make yours hold photos or prints.
My metal piece had 2 d-rings on the back which made it super easy to hang onto the front of my sign. If your selected item doesn’t, I’d recommend e6000 for permanent adhesive.
Enjoy your one of a kind piece!